 |
FOR
QUICK AND CONVENIENT PRODUCT PROPERTIES COMPARISON CHARTS,
click HERE.
See individual product datasheets for test results for
specific products.
For
Printable PDF version of this table, click HERE.
Primers
and Sealants, Adhesion Promoters
A-3, A-43, A-46, A-53, C-6, C-21, C-52,
Primer
Selection Guide and Engineering Application Notes
Adhesives, Sealants, Caulkings:
Hot
Melt Adhesive Coatings:
HM-502, HM-505
Electrical
Splice Kits:
P301-X, P302-X
Teflon Bonding Kit
Available
Dispensing Systems and Product Packaging Sizes
Application
Instructions
Datasheets
|
|
BONDiT®
Product
|
Use
Principle /
secondary
|
System
|
Key properties
|
Applications
|
|
A-3
Data
Sheet
MSDS
App
Instr
Primer Selection Guide
Available
Dispensing & Package Sizes |
- Adhesion
- Promoter
- Primer
- Adhesive
|
Silane alcohol solution, one part, low viscosity
|
- Adhesion promoter and primer for coatings, sealants and
adhesives
on metals, glass
and ceramic.
- Exceptional
moisture
and
high pH resistance.
- Outstanding
harsh
environment protection
and cathodic corrosion
protection
when used
with the B-4811.
|
Exceptional
corrosion and chemical protection. Promotes adhesion and provides
primer protection on most metals, ceramic and glass
(including
sapphire),
most elastomers
(including
silicon) and low surface energy substrates. Functional for a wide
range of overmold materials, paints, coatings, encapsulates.
High thermal stability (250ºC) and chemical resistance.
Suitable for bonding semiconductor material. Used as adhesive for
very thin bond lines (½ mil)
such as for glass-to-glass and glass-to-polyethylene bonding.
Compatible for use with BONDiT B-4X epoxy series.
Ambient
cure 60 min or accelerated thermal cure. Water white to slight
amber.
|
|
A-43
Data
Sheet
MSDS
App
Instr
Primer
Selection Guide
Available
Dispensing & Package Sizes |
- Adhesion
- Promoter
- Primer
- Adhesive
|
Silane alcohol solution, one part, very low viscosity
|
- Adhesion
promoter
for most thermoplastics, thermoset materials, elastomers,
polyurethanes.
- Can
be used on metals, glass and ceramic
|
High functionality produces good bond strength in bonding difficult-to-bond
substrates, such as polyethylene. Suitable
for a wide range of vulcanizing elastomers as adhesion promoter
to most substrates for a wide range of vulcanizing elastomers. Used as a primer for PU and TPU overmolding to a wide range of
substrates. Higher bond strengths with less material use, but lower
moisture resistance
than A-3. Ambient cure 60 min or short thermal cure. Slight amber.
|
|
A-46
Data
Sheet
MSDS
App
Instr
Primer
Selection Guide
Available
Dispensing & Package Sizes |
- Sealant
- Coating
- Conformal
coating
|
Silane alcohol solution, one part, very low viscosity
|
- Optical clear
coat
for metals, glass
and
ceramic.
- Sealant for
ceramic,
electronic
components
(e.g. flex-PCB’s exposed
to moisture).
- Architectural
coating.
|
Handles continuous
temperatures to 250ºC (500ºF).
Excellent moisture seal and exterior environment protection.
Maintains clear
coat under UV exposure to sunlight. Seals micro-pores. Wets siliceous
substrates easily, self leveling to 2 mil coating, pinhole
free
in one coat.
Superb coating for stainless steel, copper and aluminum
architectural coating.
Ambient cure 60 min or accelerated thermal
cure.
|
|
A-53
MSDS
App
Instr
Available
Dispensing & Package Sizes |
|
Silane alcohol solution, one part, very low viscosity
|
- Adhesion promoter and primer for cationic UV
cure systems
|
Broad-based adhesion promoter and primer that will not poison
cationic cure coatings and adhesives. Ambient cure 60 min or accellerated
thermal cure. Water white color.
|
|
C-6
Data Sheet
MSDS
App
Instr
Primer
Selection Guide
Available
Dispensing & Package Sizes |
|
Silane alcohol solution, one part, very low viscosity
|
- Adhesion promoter and primer for molding polyurethane and rubber
|
High functionality produces good bond strength in bonding difficult-to-bond
substrates, such as polyethylene.
Adhesion promoter on many
substrates for a wide range
of vulcanizing elastomers.
Primer for PU overmolding to
a wide range of substrates including polyolefin.
Ambient cure
60 min or accelerated thermal cure. Amber color.
|
|
BONDiT®
Product
|
Use
Principle /
secondary
|
System
|
Key properties
|
Applications
|
C-21
MSDS
App
Instr
Primer
Selection Guide
Available
Dispensing & Package Sizes |
|
Silane alcohol solution, one part, low viscosity
|
- Adhesion
promoter
and primer for
molding thermoplastics, such as polyethylene
|
Primer
and adhesion promoter on various substrates for polyolefin, urethane
coatings and overmolding. Forms cohesive
bonds with LDPE. Suitable for RPE and TPR.
Ambient
cure 60 min or accelerated thermal cure. Amber color.
|
C-52
Data sheet
MSDS
App
Instr
Primer
Selection Guide |
|
Silane alcohol solution, one part, very low viscosity
|
- Adhesion promoter and primer for molding thermoplastics, such
as polyethylene
|
Primer
and adhesion promoter on various substrates for polyolefin, fluoropolymers
(other than PTFE), polycarbonate and
acrylic, particularly for molding applications.
Forms cohesive
bonds with HDPE and MDPE to metal in molding operations. Bonds
shrink tubing to PE cable jackets.
Ambient cure 60 min or accelerated
thermal cure. Amber color.
|
|
HM-502
Data Sheet
MSDS
Primer
Selection Guide
Available
Dispensing & Package Sizes |
|
Ethylene copolymer hotmelt, water-based emulsion
|
- Hotmelt
adhesion to
wide range of substrates.
- Exceptionally
high
moisture resistance.
|
Protective
coating and adhesive for dissimilar materials including
low surface energy polymers, elastomers, metals,
glass and composites. High moisture resistance, fouling resistant
coating.
Excellent
for high voltage applications and laminating applications,
fast assembly operations as pre-coated assembly.
Oven cure,
30 min @ 200ºF.
|
|
HM-505
Data
sheet
MSDS
Primer
Selection Guide
Available
Dispensing & Package Sizes |
|
Ethylene copolymer hotmelt, solvent- based emulsion, one part
|
- Hotmelt
adhesive
on a
wide
range of substrates.
- Exceptionally
high
moisture
resistance.
|
Protective coating and adhesive for dissimilar materials including
low surface energy polymers, elastomers, metals, glass and composites.
High moisture resistance, fouling resistant coating. Excellent
for high
voltage applications and laminating applications, fast
assembly operations as pre-coated assembly.
Oven cure, 30 min @
200ºF.
|
|
B-45
Data Sheet
MSDS
App
Instr
Available
Dispensing & Package Sizes
|
- Potting
- Paint
- Adhesive
- Coating
|
Flexible two part epoxy,
2:1 mix ratio
|
- Excellent
adhesive for
low surface
energy plastics without
primer.
- Used
in potting, painting
and protective coating applications.
- Excellent
thermal and mechanical
shock
resistance.
- Ease of use.
|
Flexible
to 130% elongation, good chemical resistance.
Bonds
to most plastics, rubber, polyurethane, metals, ceramic and concrete.
Tough, flexible, chemically resistant, non-blush clear coating
with medium gloss finish. Potting compound alternative to castable
polyurethanes, particularly for electrical cable/connector/transducer
termination. Excellent for electrical and electronic applications
as protective encapsulate against very wide range of
environmental
exposures, particularly moisture and sea water. Can be
applied to oily surfaces. Will cure underwater.
Ambient cure 24 hours
or 3 hours at 100ºC for full cure.
|
|
B-45-EC
MSDS
App
Instr |
|
Flexible two part thixotropic or
paste epoxy, 2:1 ratio mix
|
- Electrically conductive
without metal.
- High
conductivity
in three axes.
- Light
weight,
high chemical resistance.
|
Conductive adhesive designed with state-of -the-art extrinsically
conductive polymers. Bonds to most plastics, rubber, polyurethane,
metals, ceramic and concrete. Excellent adhesion to low surface
energy plastics
such as
polyethylene
and
acetyl, without primer. Clean
room quality.
Ambient 24 hours or accelerated thermal cure.
|
back
to top
|
BONDiT®
Product
|
Use
Principle /
secondary
|
System
|
Key properties
|
Applications
|
|
B-45ESD
MSDS
App
Instr
|
- Coating
- Potting
- Sealant
- Adhesive
|
Flexible two part epoxy,
2:1 mix ratio
|
- Electro
static dissipative adhesive
without
metal filler.
- Three
axes conductivity.
- Not
dependent
on atmospheric moisture.
|
Coating material designed with state-of-the-art extinsically conductive
polymers. Excellent adhesion
to low surface energy
plastics such as polyethylene and acetal, without
primer. Bonds to rubber, polyurethane, metals, ceramic, and concrete.
Clean room quality.
Ambient 24 hours or accelerated thermal cure.
|
|
B-45TH
Data
Sheet
MSDS
App
Instr
Available
Dispensing & Package Sizes |
- Adhesive
- Sealant
- Conformal
coating
|
Flexible two-part thixotropic epoxy,
2:1 mix ratio
|
- Excellent
adhesion to
low surface energy plastics without primer.
- Bonding
dissimilar materials.
- Chemical
and shock resistance.
- Ease
of use.
|
Bonds
difficult-to-bond substrates and dissimilar materials such as
UHMW, polyethylene and acetal (Delrin) to steel, wood, plastics,
rubber, urethane and concrete. Survives harsh environments, particularly
moisture, marine and sub sea. Exceptional performance
as a universal adhesive for industrial applications. Will cure
underwater. Can be applied to oily surfaces.
Ambient 24 hour or
accelerated thermal cure.
|
|
B-45CC
MSDS
App
Instr
|
|
Flexible two-part trowelable epoxy paste, 2:1 mix
ratio
|
- Excellent
adhesion to low surface energy plastics without primer.
- Caulking
and sealing dissimilar materials for harsh environments.
- High
impact resistance.
- Ease
of use.
|
Caulks
and seals difficult-to-bond substrates and dissimilar materials
such as UHMW polyethylene and acetal (Delrin) to steel, wood, plastics,
rubber, urethane and concrete. Survives harsh environments, particularly
moisture, harsh chemical, marine and sub sea. Exceptional performance
as a universal caulk for industrial applications. Will cure underwater.
Can be applied to oily surfaces.
Ambient 24 hour or accelerated
thermal cure.
|
|
B-451
MSDS
App
Instr
|
- Potting
- Paint
- Coating
- Primer
- Adhesive
|
Flexible two-part epoxy,
2:1 mix ratio
|
- Flexible system
for potting, painting, primer and protective coating
applications.
- Excellent
adhesion to low surface energy plastics.
- High
chemical resistance.
- Ease
of use.
|
High chemical resistance. Tough, flexible coating, primer and
potting compound. Alternative to castable polyurethanes, particularly
for
electrical cable connector
transducer termination. Excellent for electrical and electronic
applications as a protective encapsulate against very wide range
of harsh environmental applications. Excellent for marine applications.
Will cure underwater. Can be applied to oily surfaces.
Ambient
24 hour or accelerated thermal cure.
|
|
B-46
Data Sheet
MSDS
App
Instr
Available
Dispensing & Package Sizes |
- Potting
- Sealant
- Pressure
sensitive adhesive
|
High flexibility two-part epoxy,
1:1 mix ratio
|
- Excellent
adhesion to low surface energy plastics without primer
or surface preparation.
|
Very high flexibility, 500% elongation, emphasizing
high tack for un-abraded substrates and plastic films, including
unetched Teflon. Excellent water and oil block for cable application.
Ambient or thermal cure.
|
|
B-46-CAT
Data Sheet
MSDS
App
Instr
Available
Dispensing & Package Sizes
|
- Potting
- Sealant
- Pressure
sensitive adhesive
|
Highly flexible catalyzed two-part epoxy,
1:1 mix ratio
|
- Excellent
adhesion
to low surface energy plastics without primer or surface preparation.
|
Very high flexibility,
500% elongation, emphasizing high tack for un-abraded substrates
and plastic films, including
Teflon, with accellerated thermal
cure: set
time of 10 minutes at 200ºF. Excellent
for volume production in sealing cross linked polyethylene cable
for
high
environmental
resistance in automotive applications.
Ambient cure 36 hours.
|
|
B-46TH
Data Sheet
MSDS
App
Instr
Available
Dispensing & Package Sizes
|
- Potting
- Sealant
- Pressure
sensitive adhesive
|
Highly flexible thixotropic two-part epoxy,
1:1 mix ratio
|
- Excellent
adhesion to low surface energy plastics without primer
or surface preparation.
|
Very high flexibility, 500% elongation, emphasizing
high tack for un-abraded substrates and plastic
films, including unetched Teflon. Excellent water and oil block
for cable application.
Ambient or thermal cure. May be catalyzed
for fast set time. |
|
B-46-CC
MSDS
App
Instr
|
- Caulking
- Sealant
- Adhesive
|
High flexibility two-part epoxy paste,
1:1 mix ratio
|
- Excellent
adhesion to
low surface energy plastics without primer
or surface preparation.
|
High flexibility, 300% elongation, emphasizing
high tack for un-abraded substrates and poorly prepared surfaces,
including unetched Teflon. Excellent for water and oil sealing.
Can be applied to oily surfaces.
Ambient or thermal cure.
|
|
B-4682
MSDS
App
Instr
Available
Dispensing & Package Sizes
|
|
High flexibility two-part epoxy,
1:1 mix ratio
|
- Excellent
adhesion to
low surface energy plastics without primer
or surface preparation.
|
High
flexibility, 300% elongation, emphasizing high tack for un-abraded
substrates and plastic films. Excellent
for water and oil sealing. Can be applied to oily surfaces.
Ambient
or thermal cure. May be catalyzed for fast set time.
|
|
B-4682TH
MSDS
App
Instr
Available
Dispensing & Package Sizes
|
|
High flexibility two-part epoxy,
1:1 mix ratio
|
- Excellent
adhesion to
low surface energy plastics without primer
or surface preparation.
|
High flexibility, 300% elongation, emphasizing
high tack for un-abraded substrates and plastic films. Excellent
for water and oil sealing. Can be applied to oily surfaces.
Ambient
or thermal cure. May be catalyzed for fast set time.
|
| |
|
|
|
|
B-4682CC
MSDS
App
Instr
|
- Caulking
- Sealant
- Adhesive
|
Highly flexible, two-part epoxy paste,
1:1 mix ratio
|
- Excellent
adhesion to
low surface energy plastics without primer
or surface preparation.
|
High flexibility, 200% elongation, emphasizing
high tack for un-abraded substrates and poorly prepared surfaces.
Excellent water and oil sealing.
Ambient
or thermal cure.
May
be catalyzed
for fast set time.
|
back
to top
|
BONDiT®
Product
|
Use
Principle /
secondary
|
System
|
Key properties
|
Applications
|
|
B-481
Data Sheet
MSDS
App
Instr
Available
Dispensing & Package Sizes |
- Potting
- Paint
- Coating
- Adhesive
|
Semi-rigid two-part epoxy, 2:1 ratio mix |
- High strength and toughness with
excellent thermal
stability to 400 deg F.
- Outstanding
chemical
resistance.
- Excellent
electrical, and
mechanical
properties.
- Ease
of use.
|
Encapsule sensitive instrumentation for chemical isolation,
outstanding moisture resistance, ruggedness and flexibility.
Suitable
for clean room use and direct contact with semiconductors.
Very easy to use and very clean two-part system. Superior
for coating in marine applications and other other harsh
environments. Tough, high strength, chemically resistant
non-blush clear coating with medium gloss finish. Bonds to
most
substrates.
Can be applied to oily surfaces.
Ambient 24 hour or accelerated
thermal cure.
|
|
B-481TH
Data
Sheet
MSDS
App
Instr
Available
Dispensing & Package Sizes |
- Adhesive
- Sealant
- Conformal
coating
|
Semi-rigid thixotropic two-part epoxy,
2:1 ratio mix
|
- High strength and toughness with excellent thermal stability to
400 deg F.
- Outstanding
chemical
resistance.
- Excellent
electrical, and mechanical properties.
- Ease
of use.
|
Bonds difficult-to-bond substrates and dissimilar materials including
most metals, wood, plastics, rubber, urethane and concrete. Survives
harsh environments, particularly moisture, harsh chemical, marine
and subsea. Exceptional performance as a universal adhesive for
industrial applications. Can be applied to oily surfaces. Will
cure underwater.
Ambient 24 hour or accelerated thermal cure.
|
|
B-481CC
MSDS
App
Instr
|
|
Rigid
two-part trowelable epoxy paste,
2:1 ratio
mix
|
- Caulking and
sealing dissimilar
materials for
very harsh
environments.
- Excellent
adhesion to most substrates.
- High
impact resistance.
|
Caulks and seals plastics, metals, wood, rubber, urethane, concrete
and aggregate. Survives harsh environments, particularly moisture,
and very harsh chemical environments. Superior for marine and automotive
applications. Exceptional performance as a universal caulk.
Can be applied
to oily surfaces.
Cures underwater.
Ambient 24 hour or accelerated thermal cure.
|
|
B-4811
MSDS
App
Instr
Available
Dispensing & Package Sizes
|
- Potting
- Paint
- Coating
- Primer
- Adhesive
|
Semi-rigid two-part filled epoxy,
2:1 ratio mix
|
- Semi-rigid,
high strength.
- A
filled version
of B-481 to further
increase chemical
resistance and electrical
properties and
to lower
shrinkage.
- Ease
of use.
|
Encapsulate sensitive instrumentation for chemical isolation,
outstanding moisture resistance and ruggedness. High chemical resistance
and strength. Superior for coating, priming and encapsulation
in marine applications and other very harsh environments. Very
easy to use and very clean two part system. Bonds to most substrates.
Ambient 24 hour or accelerated thermal cure.
|
|
B-482
Data
Sheet
MSDS
App
Instr
Available
Dispensing & Package Sizes |
- Potting
- Paint
- Coating
- Adhesive
|
Semi-flexible two-part epoxy,
2:1 ratio mix
|
- Excellent
balance
of
chemical, electrical, and mechanical properties.
- Ruggedized,
semi-flexible
system.
- Very
clean
system.
- Ease
of use.
|
Encapsule sensitive instrumentation for chemical isolation, outstanding
moisture resistance, ruggedness and flexibility. Suitable for clean
room use and direct contact with semiconductors. Very easy to
use and clean two-part system. Superior for
coating in marine applications and
other harsh environments. Tough, chemically-resistant, non-blush
clear coating with medium gloss finish. Bonds to most substrates.
Ambient 24 hour or accelerated thermal cure.
|
|
B-482TH
Data
Sheet
MSDS
App
Instr
Available
Dispensing & Package Sizes
|
- Adhesive
- Sealant
- Conformal
coating
|
Semi-rigid thixotropic two-part epoxy,
2:1 ratio mix
|
- Excellent balance
of chemical, electrical and mechanical properties.
- Semi-flexible,
tough
system.
- Ease
of use.
|
Bonds difficult-to-bond substrates and dissimilar materials including
most metals, wood, plastics, rubber, urethane and concrete. Survives
harsh environments, particularly moisture, harsh chemical, marine
and subsea. Exceptional performance as a universal adhesive for
industrial applications. Can be applied to oily surfaces. Will
cure underwater.
Ambient 24 hour or accelerated thermal cure.
|
|
B-482CC
MSDS
App
Instr
|
|
Rigid
two-part trowelable epoxy paste,
2:1
ratio mix
|
- Caulking and
sealing dissimilar materials for
very harsh environments.
- Excellent
adhesion to
most substrates without primer.
- High
impact resistance.
|
Caulks and seals plastics, metals, wood, rubber, urethane, concrete
and aggregate. Survives harsh environments, particularly moisture,
and very harsh chemical environments, marine and sub sea. Exceptional
performance as a universal caulk for industrial applications.
Can be applied
to oily surfaces.
Cures underwater.
Ambient 24 hour or accelerated thermal cure.
|
|
B-4821
MSDS
App
Instr
|
- Potting
- Paint
- Coating
- Primer
- Adhesive
|
Semi-flexible two-part filled epoxy, 2:1 ratio mix
|
- Excellent adhesive for low surface energy plastics.
- High
chemical resistance in a
semi-flexible
system.
- A
filled version
of B-482 to
further increase chemical
resistance
and electrical
properties and to lower shrinkage.
- Ease
of use.
|
Very tough, flexible coating, primer and potting compound with
high chemical resistance. Alternative to castable polyurethaes,
particularly for electrical cable connector transducer termination.
Excellent for electrical
and electronic applications as protective encapsulant against very
wide range of harsh environmental applications. Excellent for marine
applications. Can be applied to oily surfaces. Will cure underwater.
Ambient 24 hour or accelerated thermal cure.
|
|
B-52
Data Sheet
MSDS
App
Instr
Available
Dispensing & Package Sizes |
|
Semi-flexible
two part epoxy
10:1 mix ratio
|
- Outstanding
for bonding dissimilar materials with
high thermal expansion
differential applications.
- Fast
thermal cure, long pot life.
- Ease
of use.
|
Excellent for fast assembly of dissimilar materials with large
differentials in thermal expansion, such as glass to acrylic. Bonds
most plastics, metals, glass, and ceramics.
Cure 10 minutes
at 170ºF.
|
|
B-521
Data Sheet
MSDS
App
Instr
Available
Dispensing & Package Sizes
|
|
Semi-flexible thixotropic epoxy,
two part, off-white,
10:1 mix ratio
|
- Outstanding
for bonding dissimilar materials with
high thermal expansion differential applications.
- Fast
thermal cure, long pot life.
- Ease
of use.
|
Excellent for fast assembly of dissimilar materials with large
differentials in thermal expansion, such as glass to acrylic. Bonds
most plastics, metals, glass, and ceramics.
Cure 10 minutes at
170ºF.
|
|
B-536
Data Sheet
MSDS
App
Instr
Available
Dispensing & Package Sizes |
|
Semi-rigid two part epoxy,
10:1 mix ratio
|
- Very
high
strength
bonding of
dissimilar
materials.
- High
moisture
and solvent resistance.
- Fast
ambient
cure with good
pot life.
- Ease
of use.
|
Outstanding adhesive for very high strength potting
and assembly applications. Bonds most plastics, metals, glass and
ceramics. Good for electronics applications. High moisture resistance.
Full cure 10 minutes at ambient or 5 minutes at 170º F
or higher temperatures for faster cure down to 15 sec.
|
|
B-536TH
Data Sheet
MSDS
App Instr
Available
Dispensing & Package Sizes
|
|
Semi-rigid two part thixotropic epoxy,
10:1 mix ratio
|
- Very high
strength
bonding
of dissimilar materials.
- High
moisture
and solvent resistance.
- Fast
ambient
cure with good
pot life.
- Ease
of use.
|
Outstanding
adhesive for very high strength structural bonding and assembly
applications. Bonds most plastics, metals, glass and
ceramics. Good for electronics applications. High moisture resistance.
Full cure 10 minutes at ambient or 5 minutes at 170º F or
higher temperatures for faster cure down to 15 sec.
|
B-575
Data Sheet
MSDS
App
Instr
Available
Dispensing & Package Sizes |
|
Semi-rigid
two part epoxy,
10:1 mix ratio |
- Very
high
strength
bonding of
dissimilar
materials.
- High
moisture
and solvent resistance.
- Fast
ambient
cure with good
pot life.
- Ease
of use.
|
Outstanding
adhesive for very high strength potting and assembly applications.
Bonds most plastics, metals, glass and ceramics. Good for electronics
applications. High moisture resistance.
Full cure 40 minutes at ambient or 15 minutes at 170º F or higher temperatures
for faster cure down to 20 sec. |
back
to top
|
BONDiT®
Product
|
Use
Principle /
secondary
|
System
|
Key properties
|
Applications
|
|
P301-X
|
Splicing
|
Electrical cable splice kit
|
- Standard and
custom designs
for all cable
jacket materials,
including polyethylene.
- Excellent
for harsh environments.
|
Permanent splicing of all cable jackets with very easy assembly.
Excellent for field service applications. Suitable for all
marine, offshore oil, and other harsh environmental applications.
|
|
P302-X
|
Splicing
|
Electrical cable splice kit
|
- Standard and
custom designs
for all cable
jacket materials,
including polyethylene.
- Excellent
for harsh environments.
|
Permanent splicing of all cable jackets with very easy assembly.
Excellent for field service applications. Suitable for all
marine, offshore oil, and other harsh environmental applications.
|
|
Teflon Bonding Kit
MSDS B-45TH
MSDS
Etchant |
Flouro-polymer
bonding
|
Etchant plus BONDiT adhesive, potting or coating product |
- High
bond strength.
- Works
on many plastics.
- No
handling issues.
- Easy
to use.
|
A
clean and simple approach to bonding to fluoropolymers and
other difficult-to-bond plastics and produce a high bond strength.
All BONDiT products work with the Etchant. Most frequently,
BONDiT B-45TH is supplied in the kit, but other products
can be substituted at the time of order. |
back
to top
|
|
